Can you make Winny 100mg/ml and TNE 100mg/ml

[Irishfella]

Hi bro's can you make Winny @ 100mg/ml and TNE @ 100mg/ml?

Can these also be made in Oil?

If anyone can give me the recipe for this I would be very grateful.

Thanks

[E.L]

----How to make Winstrol Suspension @ 100mg/mL X 20mL in WATER using NO PEG and NO crashing during filtering!---

-2 grams stanozolol powder X 0.75 displacement volume = 1.5mL
-24% BB = 4.8mL
-3% BA = 0.6mL
- 3% Polysorbate 80 = 0.6mL
-DISTILLED Water (ONLY use Distilled Water!) 12.5mL

Procedures:
-Combine stanozolol powder, BA, BB, PS80 and heat until clear while swirling.
-Sterile filter this hormone concentrate into your sterile vials **You should NOT have to filter fast. Let the solution cool until its warm, it should not crash!
-Using a NEW filter, filter in your Distilled water at any pace you like. Be sure to keep swirling the vial as you filter in the distilled water.

*SHAKE the hell out of your Winny.

Complete! You now have Winny @ 100mg/mL X 20mL.

[E.L]

to make my whinny in oil
50mg/ml 100ml
whinny 5g = 3.75ml
bb 20% = 20ml
ba 3% = 3ml
PEG 300 15% =15ml
Oil= 58.25 ml

will mix my whinny,oil,ba,bb and heat it until the powder is dissolved and filter it into my vials then i will filter in my PEG. since the PEG and oil don't really mix together all the bubles will make filtering a bitch. so add 17ml of my whinny solution to my vials and then add 3ml of peg to my vials so 5 20ml vials at 50mg/ml

[RonnyT]

to make my whinny in oil
50mg/ml 100ml
whinny 5g = 3.75ml
bb 20% = 20ml
ba 3% = 3ml
PEG 300 15% =15ml
Oil= 58.25 ml

will mix my whinny,oil,ba,bb and heat it until the powder is dissolved and filter it into my vials then i will filter in my PEG. since the PEG and oil don't really mix together all the bubles will make filtering a bitch. so add 17ml of my whinny solution to my vials and then add 3ml of peg to my vials so 5 20ml vials at 50mg/ml

How hot do you filter it and through wich filter??

Beside that PEG is waterbased and needs a surfactant like ps80, thats also the reason why it doesn't mix with oil.

[Irishfella]

to make my whinny in oil
50mg/ml 100ml
whinny 5g = 3.75ml
bb 20% = 20ml
ba 3% = 3ml
PEG 300 15% =15ml
Oil= 58.25 ml

will mix my whinny,oil,ba,bb and heat it until the powder is dissolved and filter it into my vials then i will filter in my PEG. since the PEG and oil don't really mix together all the bubles will make filtering a bitch. so add 17ml of my whinny solution to my vials and then add 3ml of peg to my vials so 5 20ml vials at 50mg/ml

How hot do you filter it and through wich filter??

Beside that PEG is waterbased and needs a surfactant like ps80, thats also the reason why it doesn't mix with oil.

I'm sure you have a few recipes up your sleeve dutchy :-)

Care to shre some of them with me :-)

[RonnyT]

Its experimenting, the recipe from Extra Large is good only the oil won't mix with the PEG. See my pic where these two solvents fall out of emulsion and make two layers where the upper one holds the API(arrow). I made many vials on many ways. I even made one holding almost 700 mg/ml, it was to thick to inject and I diluted it with Ethyl Oleate, but that didn't work for above reason. You need to use mixing solvents and carrier. You can't filter it, thats only possible through a laboratory filtersystem from RVS cause you have to filter it very hot and later add the carrier. It will crash in the filter, if you filter it to cold or use a cold filter, it will clog.
I would like to share, but I created this one for HCL. It would not be fair to them.

[Irishfella]

Fair, enough Bro. Thanks for the reply

Anyone else got any good high dosage test per ml, winny 100mg/ml and Test Susp 100mg/ml recipes?

Thanks

[colie]

holy shit....680mg of wini per ml??????

now thats an achievement...

how hi do u think u can take it dutch...without it turning to plastic...lol

[RonnyT]

holy shit....680mg of wini per ml??????

now thats an achievement...

how hi do u think u can take it dutch...without it turning to plastic...lol
Its just a gag, iwouldn't shoot it for the world :lol:

Now I recieved a lotta questions about the hot filtering and I mean alot. The rvs system (Roth Germany) but this system,.. the old Whatman works very well also. Filter the water (buy at carshops the accuwater) at 20 micron throug the filter. Heat the winny solution. put the whatman filter on the electric heater also, so it is hot too ( not to hot that it will burn the manchet) and poor it through the whatman with filterpaper, first "glue" the paper with a bit of the winnysolution onto the Whatman, otherwise the hot solution can lift the paperfilter and it will run between the filterbottem and the paper. And you'll end up with an unpure solution. Once the winnysolution drops into the water it will form a solution.

[RonnyT]

The plastic system is only suitable for oil.

[RonnyT]

Here you'll see a comparison from original winny and a test version. The test version was made without PEG (Poly ethyleen glycol). It rather sticks to the glas then that it stays into solution (unstable)
This is how it was made:
20 ml @ 100 mg/ml
2 gram API (stanozolol)
4,8 ml Benzyl Benzoate 24%
0,6 ml PS80 (polysorbate) 3%
0,6 ml Benzyl Alcohol
12.5 ml dist. water

To buy: type in lab suply Whatman at google.com, better typ in lab suply whatman in your domestic language in the domestic google.
ForHolland this comes down to google.nl laboratorium benodigdheden Whatman
Pumped you owe me one.... :wink:

[RonnyT]

Í got mails that things where not clear at all, next time via thia thread and not via p.m.
This is a winny set-up, melt the winny and watch the temperature and equel melting.
heat the whatman filter etc etc..

Forgot the pic :D

[Pumped83]

Ok bro..

Where do you find filters that can stay heated, and how do you make em stay heated, also where to buy the expensive RVS systems, i been searching my ass of on google and came up emty, i cant see how you do this or where to buy it, and this way would make winny possible to be filterd when making 200ml at the same time?


Im sorry but i dont see the setup or how the filter is heated and at what temperature it stays heated without melting and such, if u could filter winny at 200C then it would be great but what filter systems would take that kind of heat?